Am26lv32eipwr TSSOP16 interface chip is original and in stock
explain
Am26lv32e device consists of four differential line receivers and has three state output. The device is designed to meet the requirements of TIA / eia-422-b and ITU recommendation v.11 drivers with a small power supply voltage. This device is optimized to achieve balanced bus transmission at switching rates up to 32mhz. Through three state output, the device can be directly connected to the bus organized system.
The am26lv32e has a fail safe circuit that prevents the device from placing an unknown voltage signal at the receiver output. In the open circuit failure protection, a high-level state will be generated at the corresponding output. The device supports local power off applications using ioff. The ioff circuit can disable the output to prevent the current return from damaging the device when the device is powered off.
characteristic
• meet or exceed tia/eia-422-b and ITU
Requirements of recommendation v.11
• operation from a 3.3V single power supply
• switching frequency up to 32mhz
• ESD protection of RS422 bus pin
• low power dissipation: 27mw (typ.)
• open circuit failure protection
• common mode input voltage range of ± 7V with sensitivity of ± 200mV
• accept 5V logic input and 3.3V power supply (enable input)
• input hysteresis: 35mV (typ.)
• pins 26c32 and 26lsc32 are compatible
• ioff supports local power failure mode operation
2 Application
• high reliability automotive applications
• support configuration control / printing
• ATM and cash counter
• smart grid
Am26lv32e device consists of four differential line receivers and has three state output. The device is designed to meet the requirements of TIA / eia-422-b and ITU recommendation v.11 drivers with a small power supply voltage. This device is optimized to achieve balanced bus transmission at switching rates up to 32mhz. Through three state output, the device can be directly connected to the bus organized system.
The am26lv32e has a fail safe circuit that prevents the device from placing an unknown voltage signal at the receiver output. In the open circuit failure protection, a high-level state will be generated at the corresponding output. The device supports local power off applications using ioff. The ioff circuit can disable the output to prevent the current return from damaging the device when the device is powered off.
characteristic
• meet or exceed tia/eia-422-b and ITU
Requirements of recommendation v.11
• operation from a 3.3V single power supply
• switching frequency up to 32mhz
• ESD protection of RS422 bus pin
• low power dissipation: 27mw (typ.)
• open circuit failure protection
• common mode input voltage range of ± 7V with sensitivity of ± 200mV
• accept 5V logic input and 3.3V power supply (enable input)
• input hysteresis: 35mV (typ.)
• pins 26c32 and 26lsc32 are compatible
• ioff supports local power failure mode operation
2 Application
• high reliability automotive applications
• support configuration control / printing
• ATM and cash counter
• smart grid
• AC and servo motor drives
Want to know more model stock Price
Tel / wechat 13714705290
Brand new, original and attentive service