DRV5053VAEDBZTQ1 Hall sensor TI original stock
explain
The DRV5053-Q1 device is a chopper stabilized Hall IC that provides a magnetic field sensing solution with excellent sensitivity stability and integrated protection characteristics throughout the entire temperature range. The 0V to 2V analog output can make a linear response to the applied magnetic induction intensity and can distinguish the polarity of the magnetic field direction. The wide operating voltage range of up to -22V for reverse polarity protection (2.7V to 38V) makes this device suitable for a wide range of automotive and consumer applications. Provide internal protection functions for reverse power supply situations, sudden load drops, and output short circuits or overcurrent.
characteristic
Linear output Hall sensor
AEC-Q100 standard that meets the requirements of automotive applications
Level 1: TA=-40 to 125 ° C (Q, see)
Level 0: TA=-40 to 150 ° C (E, see)
Excellent temperature stability
Sensitivity within the temperature range is ± 10%
High sensitivity options:
– 11mV/mT (OA, see)
–23mV/mT (PA)
–45mV/mT (RA)
–90mV/mT (VA)
+23mV/mT (CA)
+45mV/mT (EA)
Supports wide voltage range
2.7V to 38V
No external voltage regulator required
Amplified output stage
2.3mA pouring current, 300 µ A pulling current
Output voltage: 0.2V to 1.8V
B = 0mT，OUT = 1V
Fast power on: 35 µ s
Small package size
Surface Mount 3 Pin Small Form Factor Transistor (SOT) -23 (DBZ)
2.92mm × 2.37mm
Plug-in 3-pin System Level Package (SIP) (LPG)
4.00mm × 3.15mm
Protective characteristics
Reverse power protection (up to -22V)
Supports up to 40V load shedding
Output short-circuit protection
Output current limit
Battery output short circuit protection
application
Flowmeter
Docking adjustment
Vibration correction
The DRV5053-Q1 device is a chopper stabilized Hall IC that provides a magnetic field sensing solution with excellent sensitivity stability and integrated protection characteristics throughout the entire temperature range. The 0V to 2V analog output can make a linear response to the applied magnetic induction intensity and can distinguish the polarity of the magnetic field direction. The wide operating voltage range of up to -22V for reverse polarity protection (2.7V to 38V) makes this device suitable for a wide range of automotive and consumer applications. Provide internal protection functions for reverse power supply situations, sudden load drops, and output short circuits or overcurrent.
characteristic
Linear output Hall sensor
AEC-Q100 standard that meets the requirements of automotive applications
Level 1: TA=-40 to 125 ° C (Q, see)
Level 0: TA=-40 to 150 ° C (E, see)
Excellent temperature stability
Sensitivity within the temperature range is ± 10%
High sensitivity options:
– 11mV/mT (OA, see)
–23mV/mT (PA)
–45mV/mT (RA)
–90mV/mT (VA)
+23mV/mT (CA)
+45mV/mT (EA)
Supports wide voltage range
2.7V to 38V
No external voltage regulator required
Amplified output stage
2.3mA pouring current, 300 µ A pulling current
Output voltage: 0.2V to 1.8V
B = 0mT，OUT = 1V
Fast power on: 35 µ s
Small package size
Surface Mount 3 Pin Small Form Factor Transistor (SOT) -23 (DBZ)
2.92mm × 2.37mm
Plug-in 3-pin System Level Package (SIP) (LPG)
4.00mm × 3.15mm
Protective characteristics
Reverse power protection (up to -22V)
Supports up to 40V load shedding
Output short-circuit protection
Output current limit
Battery output short circuit protection
application
Flowmeter
Docking adjustment
Vibration correction
Shock absorber control
