Tusb1002rger USB chip dual channel linear transfer driver inventory cleaning
explain
Tusb1002 is the industry's first dual channel USB 3.1 ultra high speed + (SSP) adapter driver and signal conditioner. The device adopts ultra-low power consumption architecture, which is powered by 3.3V power supply, and the power consumption is very low when running. It supports usb3 1 low power consumption mode, which can further reduce the power consumption in idle state. Tusb1002 implements a linear equalizer with a maximum allowable inter symbol crosstalk (ISI) loss of 16dB. When the USB signal is uploaded on the printed circuit board (PCB) or cable, its integrity will be reduced under the influence of channel loss and inter symbol crosstalk. The linear equalizer can compensate the channel loss and extend the transmission distance of the channel, so as to make the system comply with the USB specification.
With dual channels and small package, tusb1002 can be installed in usb3 1. Flexible placement in the transmission path. Tusb1002 is packaged in 24 pin 4mm x 4mm vqfn. It also offers a commercial grade (tusb1002) version.
characteristic
• support usb3 1 ultra high speed (5Gbps) and ultra high speed + (10Gbps)
• supports PCI Express gen3, SATA express and SATA gen3.
• ultra low power architecture – active state: < 340mw – U2 / U3: < 8mW – disconnected state: < 2MW
• adjustable voltage output swing linear range up to 1200 mVpp
• no host / device side requirements
• 16 linear equalization settings, up to 16dB at 10Gbps
• adjustable DC equalization gain
• support hot plug
• compatible with lvpe502a and lvpe512 USB 3.0 adapter driver pins
• temperature range: 0 ° C to 70 ° C
• ± 6kV mannequin (HBM) electrostatic discharge (ESD)
• powered by a 3.3V single power supply.
• packaged in 4mm x 4mm vqfn
Apply
• laptops and desktops
• television
• tablet
• mobile phones
• active cable
• docking station
Tusb1002 is the industry's first dual channel USB 3.1 ultra high speed + (SSP) adapter driver and signal conditioner. The device adopts ultra-low power consumption architecture, which is powered by 3.3V power supply, and the power consumption is very low when running. It supports usb3 1 low power consumption mode, which can further reduce the power consumption in idle state. Tusb1002 implements a linear equalizer with a maximum allowable inter symbol crosstalk (ISI) loss of 16dB. When the USB signal is uploaded on the printed circuit board (PCB) or cable, its integrity will be reduced under the influence of channel loss and inter symbol crosstalk. The linear equalizer can compensate the channel loss and extend the transmission distance of the channel, so as to make the system comply with the USB specification.
With dual channels and small package, tusb1002 can be installed in usb3 1. Flexible placement in the transmission path. Tusb1002 is packaged in 24 pin 4mm x 4mm vqfn. It also offers a commercial grade (tusb1002) version.
characteristic
• support usb3 1 ultra high speed (5Gbps) and ultra high speed + (10Gbps)
• supports PCI Express gen3, SATA express and SATA gen3.
• ultra low power architecture – active state: < 340mw – U2 / U3: < 8mW – disconnected state: < 2MW
• adjustable voltage output swing linear range up to 1200 mVpp
• no host / device side requirements
• 16 linear equalization settings, up to 16dB at 10Gbps
• adjustable DC equalization gain
• support hot plug
• compatible with lvpe502a and lvpe512 USB 3.0 adapter driver pins
• temperature range: 0 ° C to 70 ° C
• ± 6kV mannequin (HBM) electrostatic discharge (ESD)
• powered by a 3.3V single power supply.
• packaged in 4mm x 4mm vqfn
Apply
• laptops and desktops
• television
• tablet
• mobile phones
• active cable
• docking station